Zhengzhou High-tech Development Zone

17739766618

18337183728



Home > News > Industry News

How to solve the dripping phenomenon of the filling machine?

发布时间:2019-10-31

浏览次数:50

First, check the mechanical problems of the filling machine itself to determine whether the ball valve in the filling machine is damaged or not strict. If it is the internal ball valve, the solution to the problem is to replace the inner ball valve.
If the filling machine is dripping, we need to do this:

First, check the mechanical problems of the filling machine itself to determine whether the ball valve in the filling machine is damaged or not strict. If it is the internal ball valve, the solution to the problem is to replace the inner ball valve. There is no way to damage the inner ball valve. Repairs can only be replaced with new ones.

Second, check whether the syringe assembly is clean. If it is not clean, the inner and outer tubes will not be cleaned and jammed. The syringe needs to be removed, cleaned, and disinfected.

Third, check whether the filling nozzle hole is complete. If the filling nozzle hole is broken, the filling machine will leak during the running process. If the filling nozzle hole is broken, it is necessary to replace the filling nozzle hole, and check the usage of other filling nozzle holes, aging or corrosion, and replace it as soon as possible.

Fourth, check whether the o-ring is corroded or worn. If the o-ring is corroded or worn, it will cause dripping of the filling machine. Therefore, if this is the case, it is recommended to replace the o-ring.

Fifth, check the position of the tank. Make sure that the cylinder is in the center of the cylinder bracket. Also check if the cylinder piston and the piston rod are secure. If it is loose, lock it. If the position of the tank problem changes, you need to reinstall the tank to confirm the correct position.

The dripping problem of the filling machine is not big, it is not small, and the problem of dripping of the filling machine has not been solved, which may affect the efficiency and quality of our follow-up work. Therefore, we must pay attention to the dripping problem of the filling machine. If problems occur in time, the life of the filling machine will be improved, and the quality and quality of the products will be improved.